With this FKP-1020F, you can utilize a full of range KURODA’s technical know-how in polishing through the software installed in the built-in personal computer, eliminating the nees for high degree of polishing skill.
The FKP-1020F can be customized by accumulating your own data and technical know-how.
You can input formulas of up to 20th power for aspherical surfaces. Therefore, aspherical surface with extremely complicated and peculiar curvature can be uniformly polished in the normal direction.
Partial modification for enchancing configurational accuracy in the polishing process has not been expected up to now. However, the FKP-1020F incorporates the software to control the staying time of the polishing head, making more accurrate modification possible. With this software, you can input modification pitches at 0.1, 0.05 and 0.02mm, respectively.
|
|
FKP-1020F |
|
|
Work size |
Φ3-Φ30mm (Max.100mm) |
|
|
Table revolution speed |
30-100mm-1 |
|
|
Polishing head speed |
300-1000min-1 |
|
|
Table X axis |
Stroke |
100mm |
|
Feed rate |
0.1-3m/min |
|
|
Table Y axis |
Stroke |
20mm |
|
Feed rate |
Manual feed |
|
|
Z axis of head |
Stroke |
200mm |
|
Polishing head |
Stroke |
30mm |
|
Tilting angle of table |
± 90° |
|
|
Control axis |
Longitudinal travel axis of table (X axis) Potary axis of polishing head Rotary axis of table Z axis of head *Both X and B axes are simultaneously controlled by PC. |
|
|
Input power supply |
AC200V±10% 3-phase 0.7kVA AC100V 5A |
|
|
Air supply |
0.5MPa 100L/min |
|
|
Net mass |
400kg |
|
