| GP,DP series |
 |
|
Screw shaft ƒ³ 6 ~ ƒ³ 20, Accuracy grade C3 / GP - tube Method, DP - Deflector Method
|
|
Ground ball screws of accuracy grade C3S and C3F are available as standardized
and stocked items.
As only one shaft end is finished, additional end
machining of another shaft end is required to meet your
applications.
Machining of shaft end Fixed side: Already finished so that standardized
support unit can be used.
Supported side: KURODA takes on the
machining of the shaft end. Specify the intended size by the attached shaft end
finish ordering sheet. |
|
|
| Reasonable price |
| Mass production of nuts and screw shafts has successfully realized reasonable
pricing of ground ball screws. |
|
| High precision |
| JIS C3 grade axial play S (preloaded model) and axial play F (0.005 or less)
model are serialized to meet high degree of precision feed. |
|
| Short delivery time |
| All items are stocked for quick delivery. |
|
|
|
|
|
|
|
Series
|
|
GP Series
|
C3
|
Single nut
|
0(preloaded)* OR 0.005mm* or less
|
| DP Series |
|
| (note) For ball screws of lead accuracy grade C3 contact KURODA |
|
| Table of optional specifications for each model |
|
Series
|
Additional machining of shaft end
|
Surface treatment (note 1)
|
Difference of grease
|
Direction of Nut
|
Wiper removal
|
|
GP/DP
|
O
|
O
|
O
|
O
|
 |
|
(note 1) The above mentioned surface treatment is LD treatment (coating thickness: 1 to 2 μm). As coating may be peeled off by wiper in case of LD treatment of Φ6-1, Φ8-1, Φ8-2, Φ10-2, Φ12-2, Φ12-3, contact KURODA
(note) Mounting accuracy of ball screw in case of shaft end machining is equivalent to JIS C5 grade. |
|
|
|
