Customized ground ball screws of single nut type, integral nut type
and double nut type using tube method (GR series) and deflector
method (GD series) with a range of small diameter (Φ5) to
large diameter (Φ125) are available.
Moreover, those of JIS C0 to C10 grade accuracy can be manufactured.
The range of screw shafts that can be manufactured to meet each accuracy
grade of customized ground ball screws is shown below:
When the slenderness ratio (shaft length per shaft diameter) is large,
it is sometimes difficult to manufacture a ball screw with the desired
accuracy.
The following table shows the maximum length of screw shafts of each
accuracy grade that can be manufactured in the standard process.
When ball screws exceeding the manufacturable range are required,
contact KURODA.
